86-0755-82544386
Rm. 603, Floor 6, Bldg. 405, Shangbu Ind. Zone, Zhenxing Road, Futian Dist., Shenzhen, Guangdong, China (Mainland)
Specification of PCB Manufacturing
| 1 | Description | PCB Specification |
| 2 | Material | FR-4/HTG150-180 FR-4/CEM-1/CEM-3/Aluminum |
| 3 | Layer | 1-20 |
| 4 | Board Thickness | 0.2mm- 4.0mm |
| 5 | Board Thickness Tolerance | +/-10% |
| 6 | Copper thickness | 17.5um-175um (0.5oz-5oz) |
| 7 | Min Trace Width | 0.15mm |
| 8 | Min Space Width | 0.15mm |
| 9 | Min Drilling Dia | 0.2mm |
| 10 | PTH copper thickness | 0.4-2mil(10-50um) |
| 11 | Tolerance of Etching | ±1mil(±25um) |
| 12 | V-cut angle | 25°,30°,45°,60° |
| 13 | Pearl Strength of line | ≥ 6lb/in(≥ 107g/mm) |
| 14 | Impedance control and tolerance | 50Ω±10% |
| 15 | Twist&Wrap | ≤ 0.5% |
| 16 | Soldermask | Green, Red, Blue, White, Black, Yellow |
| 17 | Surface Finish/Plating | HASL/Lead Free HASL/OSP/Gold Plating/Immersion Gold/ENIG |
| 18 | Certificate | ROSH. ISO9001, UL Certificate |
| 19 | File | Protel 99se/P-CAD/Autocad/Cam350 |
| 20 | Inner packing | Vacuum packing,Plastic bag |
| 21 | Outer packing | Standard carton packing |
Detailed Terms for Pcb Assembly
| 1 | Quantity | Prototype&Low Volume PCB Assembly,from 1 Board to 250, is for specialty,but we can handle orders up to 1000 |
| 2 | Type of Assembly | SMT and Thru-hole |
| 3 | Solder Type | Water Soluble Solder Paste,Leaded and Lead-Free |
| 4 | Components | Passives Down to 0201 Size BGA and VFBGA Leadless Chip Carries/CSP Double-Sided SMT Assembly Fine Pitch to 08 Mils BGA Repair and Reball Part Removal and Replacement-Same Day Service |
| 5 | Bare Board Size | Smallest:0.25x0.25 Inches Largest:20x20 Inches |
| 6 | File Formats | Bill of Materials Gerber Files Pick-N-Place File(XYRS) |
| 7 | Type of Service | Turn-Key,Partial Turn-Key or Consignment |
| 8 | Component Packaging | Cut Tape Tube Reels Loose Parts |
| 9 | Turn Time | Same Day Service to 15 day service |
| 10 | Testing | Flying Probe test XRAY Inspection AOI Test |
PCB or PCB Assembly files requests
1. Gerber files of the bare PCB board
2. BOM (Bill of material) for assembly
To short the lead time, please kindly advise us if there is any acceptable components substitution.
3. Testing Guide & Test Fixtures if necessary
4. Programming files & Programming tool if necessary
5. Schematic if necessary
